• Continuous loop-powered 4-20mA operation
• Remote DIN Rail mounted transmitter, up to 1000ft away
• Hermetically sealed, vibration resistant construction
• 1/2” NPT thread standard
• Internal probe PFA clad or Stainless 316 bare
• Cable extension or Brad Harrison connector
• Accuracy 1% of span for same dielectric

The INTEMPCO series LTX60 are one of the most
compact, vibration resistant RF level transmitters ever
made available to the industry. They feature one-piece
tubular design, welded 3/4” NPT fitting and a concentric
internal PFA clad probe. Remote electronics are potted
into the tube portion above the fitting. DIN Rail mounted
transmitter can be installed up to a 1000 feet away from
the process where calibration can be performed. The
microprocessor-based electronics convert frequency
change, detected by the probe, into a linear, highly
accurate 4-20 mA signal. This compact design makes
installation and setup a simple task. The advanced
signal conditioning circuitry greatly minimizes the
adverse affects of poor dialectric and material coating
on the probe.

LTX60 RF transmitters can be used in metallic and
non-metallic tanks, stationary or mobile equipment.
Ideal for small tanks of all types, they can be used in
virtually any liquid, conductive or non-conductive. One
ideal application is measuremnt of fuel and oil level of
tanks in mobile equipment. Compact, rugged and
hermetically sealed construction of LTX60 series sensors
cannot be beat in performance.

• Diesel fuels, other fuels and oils in metallic or non-metallic tanks
• Water based liquids in metallic or non-metallic tanks
• Acids compatible with Stainless 316 and PFA Teflon in metallic or non-metallic tanks
• MEK and other solvents
• Chemical holding tanks, metallic or non-metallic
• Measurement of liquid levels in mobile equipment
• On-site calibration may be required
• Not recommended where material dielectric varies due to change of temperature or pressure

• Catalog Sheet (164 kb)
• Complete Catalog (2532 kb)